Table of Contents
Advertisement
WARNING!
THE CIRCULAR METAL SAW MAY ONLY BE USED WITH THE SAFETY DEVICES ACTI-
VATED.
Disconnect the circular metal saw whenever you detect a failure in the safety devices or
when they are not fitted!
All additional installations carried out by the operator must incorporate the prescribed
safety devices.
Being the machine operator, this will be your responsibility!
"Safety devices" on page 9
1.4
Qualification of personnel
1.4.1
Target group
This manual is addressed to
•
users,
•
operators,
•
maintenance staff.
The warning notes therefore refer to both operation and maintenance of the circular metal saw.
Determine clearly and irrevocably who will responsible for the different activities on the machine
(use, maintenance and repair).
Vague or unclear assignment of responsibilities constitute a safety hazard!
Always disconnect the circular metal saw from the power supply and secure the circular metal
saw against restarting.
1.4.2
Authorised personnel
WARNING!
Incorrect use and maintenance of the circular metal saw constitutes a danger for the
staff, objects and the environment.
Only authorised personnel may operate the circular metal saw!
The only staff authorised to use this machine and perform maintenance on it are trained and
instructed technical staff working for the operator and manufacturer.
The operator must
Obligations
•
train staff,
of the opera-
•
instruct staff regularly (at least once a year) on
tor
-
-
-
•
check staff's understand,
•
document training/instruction,
•
require staff to confirm participation in training/instruction by a signature,
•
check whether the staff are aware of safety and of dangers in the workplace and whether
they observe the operating manual.
Page 8
all safety standards that apply to the machine,
operation,
accredited technical guidelines,
Safety
Advertisement
Table of Contents
