Planet WAP-500N User Manual page 48

The page includes the following settings following settings:
Object
• Wireless Mode
• Channel HT Mode
• Extension Channel
• Channel / Frequency
• Auto
• AP Detection
• Current Profile
SSID Profile
• SSID
• VLAN ID
• Suppressed SSID
• Station Separation
• Wireless Security
• Save
Figure 4-25 Wireless Network – SSID Profile Figure
Description Description
Wireless mode supports 802.11a/n mixed modes. Wireless mode supports
The default channel bandwidth is 20/40MHz. The larger the channel, the The default channel bandwidth
better the transmission quality and speed. better
Select upper or lower channel. Your selection may affect the Auto Select upper or lower channel. Your selection may affect the Auto channel
function. function.
Select the channel and Select the channel and frequency that apply to your country's
Check this option to enable auto-channel selection. Check this option to enable auto
AP Detection can select the best channel to use by scanning nearby AP Detection can select the best channel to use by scanning nearby
areas for Access Points. areas for Access Points.
Configure up to four different SSIDs. If many client devices will be Configure up to four different SSIDs. If many client devices will be Configure up to four different SSIDs. If many client devices will be
accessing the network, you can arrange the accessing the network, you can arrange the devices into SSID groups.
Click Edit Click Edit to configure the profile and check whether you want to enable to configure the profile and check whether you want to enable
extra SSIDs. extra SSIDs.
Specify the SSID for the current profile. Specify the SSID for the current profile.
Specify the VLAN tag for the current profile. Specify the VLAN tag for the current profile.
Check this option to hide the SSID from clients. If checked, the SSID will Check this option to hide the SSID from
not appear in the site survey. not appear in the site survey.
Click the appropriate radio button to allow Click the appropriate radio button to allow or prevent communication
between client devices. between client devices.
Refer to section Refer to section 5.5.3 Security
Click Save to save changes. Click
-47-
User Manual of WAP WAP-500N/WBS-500N
mixed modes.
is 20/40MHz. The larger the channel, the
your country's regulations.
channel selection.
devices into SSID groups.
clients. If checked, the SSID will
or prevent communication
Setting.