Port Forwarding; Figure 4-21 Port Forwarding - Planet WAP-500N User Manual

• Cancel

4.4.4 Port Forwarding

Go to the "Operation Mode" page to configure the device as "WISP" and then go to "Router
Forwarding" to enable VPN passthrough you required.
The page includes the following settings:
Object
• #
• Name
• Protocol
• Start Port
• End Port
• Server IP Address
• Enable
• Modify
• Delete
• Add Entry
• Accept
When clicking Add Entry, the following window pops up and fill in the fields required to add a new forwarding
rule.
Click Cancel to cancel the setting.

Figure 4-21 Port Forwarding

Description
Displays the sequence number of the forwarded port.
Displays the name of the forwarded port.
Displays the protocol to use for mapping from the following: TCP, UDP or
Both.
Displays the LAN port number that WAN client packets will be forward to.
Displays the port number that the WAN client packets are received.
Displays the IP address of the server for the forwarded port.
Click to enable or disable the forwarded port profile.
Click to modify the forwarded port profile.
Click to delete the forwarded port profile.
Click Add Entry to add the new forwarding rule.
Click Accept to apply the setting.
-43-
User Manual of WAP-500N/WBS-500N
Port