Planet WAP-500N User Manual page 63

• Distance
• Aggregation
Wireless Traffic Shaping
• Enable Traffic Shaping
• Incoming Traffic Limit
• Outgoing Traffic Limit
• Total Percentage
• SSID1 to SSID4
Client Limit: This option is only available in AP and WDS AP modes.
• Frequency
• Enable
• Max Client
• Accept
• Cancel
often and consumes more bandwidth.
Specify the distance between the master AP and slave AP. Longer
distances may drop high-speed connections.
A part of the 802.11n standard that allows sending multiple frames per
single access to the medium by combining frames together into one larger
frame. It creates the larger frame by combining smaller frames with the
same physical source, destination end points, and traffic class (QoS) into
one large frame with a common MAC header. This option reduces the
number of packets, but increases packet sizes.
Enable or disable the regulation of packet flow leaving an interface for
improved QoS.
Specify the wireless transmission speed used for downloading.
Specify the wireless transmission speed used for uploading.
Specify the total percentage of the wireless traffic that is shaped.
Specify the percentage of the wireless traffic that is shaped for a specific
SSID.
Display the frequency of the device's radio interface.
Click to enable the client limit function.
Specify the maximum clients allowed to connect to the radio interface.
Click Accept to apply all changes.
Click Cancel to cancel the settings.
-62-
User Manual of WAP-500N/WBS-500N