Table of Contents
Advertisement
The page includes the following settings
following settings:
Object
• System Information
• LAN Settings
• WAN Settings
• Current Wireless Settings
4.2.2 Save/Reload
Click "Status
Save/Reload" and the following page
Click Save & Apply to save and apply all configurations.
to save and apply all configurations.
Click Revert to cancel the unsaved changes and revert to the previous settings that have been saved.
to cancel the unsaved changes and revert to the previous settings that have been saved.
to cancel the unsaved changes and revert to the previous settings that have been saved.
It's not necessary to save and apply the settings if unsaved changes list is empty.
not necessary to save and apply the settings if unsaved changes list is empty.
Description
Description
Shows the general system information such as device name, MAC
S
address, country, current time, and firmware version.
address, country, current time,
Shows Local Area Network settings such as the LAN IP address, subnet
S
mask, DHCP server, and Rx/Tx packets.
mask,
S
Shows Wide Area Network settings such as the MAC address, connecti
type, connection status, IP address, subnet mask, primary and secondary
type, connection status,
DNS, and Rx/Tx packets.
DNS
Shows wireless information such as operation mode, wireless mode,
S
channel bandwidth, frequency, channel, information about each SSID,
channel bandwidth,
security settings
security settings, and Rx/Tx packets.
nd the following page will be displayed.
Figure 4-4 Save/Reload
-27-
User Manual of WAP
WAP-500N/WBS-500N
device name, MAC
firmware version.
LAN IP address, subnet
MAC address, connection
address, subnet mask, primary and secondary
operation mode, wireless mode,
information about each SSID,
Advertisement
Table of Contents
