Backup/Restore Settings; Figure 4-43 Backup /Restore Settings - Planet WAP-500N User Manual

The page includes the following settings The page includes the following settings:
Object
• SNMP
• Contact
• Location
• Community Name (Read
Only)
• Community Name
(Read/Write)
• Trap Destination Address
• Trap Destination
Community Name
• SNMPv3
• User Name
• Auth Protocol
• Auth Key (8-32 Characters)
• Priv Protocol
• Priv Key (8-32 Characters)
• Engine ID
• Save/Apply
• Cancel

4.6.4 Backup/Restore Settings

Backup/Restore Settings
Click "Management
Description Description
Enable or disable the SNMP service. Enable or disable the SNMP service.
Enter the contact details of the device. Enter the contact details of the device.
Enter the location of the device. Enter the location of the device.
Enter the Enter the password for accessing the SNMP community for
access. access.
Enter the password for accessing the SNMP community for Enter the password for accessing the SNMP community for read and
write access. write access.
Enter the IP address where SNMP traps are to be sent. Enter the IP address
Enter the password of the SNMP trap community. Enter the password of the SNMP trap community.
Enable or Disable the SNMPv3 feature. Enable or Disable the SNMPv3 feature.
Specify the username for SNMPv3. Specify the username for SNMPv3.
Select the authentication protocol type: MD5 or SHA. Select the authentication protocol type: MD5 or SHA. Select the authentication protocol type: MD5 or SHA.
Specify the authentication key for authentication. Specify the authentication key for authentication.
Select the privacy protocol type: DES. Select the privacy protocol type: DES.
Specify the privacy key for privacy. Specify the privacy key for privacy.
Specify the engine ID for SNMPv3. Specify the engine ID for SNMPv3.
Click Save/Apply to apply all changes. Click
Click Cancel to cancel the settings. Click
Backup/Restore Restore Settings" and the following page will be displayed.
Figure 4-43 Backup/Restore Settings Figure
User Manual of WAP
for accessing the SNMP community for read-only
where SNMP traps are to be sent.
will be displayed.
-65-
WAP-500N/WBS-500N