Security Settings - Planet WAP-500N User Manual

NOTE:
1. The WDS link settings is only available in The WDS link settings is only available in WDS Bridge mode and is communicating through
wireless MAC address each other by using non wireless MAC address each other by using non-standard protocol which may not
with other brands or
2. The security setting in each site of The security setting in each site of WDS link must be the same.
3. The wireless channel must be fixed and must be the same in each site of WDS link. The wireless channel must be fixed and must be the same in each site of WDS link. The wireless channel must be fixed and must be the same in each site of WDS link.

4.5.3 Security Settings

Go to the "Wireless
In the AP/WDS AP mode, click the Edit
and configure the wireless security for the wireless network. and configure the wireless security for the wireless network.
In the CB/WDS STA/CR/Repeater mode,
the wireless security similar to the root AP's security settings
s or models. Use the same model for full compatibility . Use the same model for full compatibility as required.
Wireless Network" page to configure the security settings. Wireless Network
Edit button on the "Wireless Network" page to enter the
Figure 4-28 Security Settings – AP/WDS AP Mode Figure
mode, select Security Mode on the "Wireless Network
root AP's security settings.
User Manual of WAP
standard protocol which may not be compatible
page to enter the "SSID Profile" page
Wireless Network" page to configure
-50-
WAP-500N/WBS-500N
is communicating through