Wan Settings - Planet WAP-500N User Manual

The page includes the following settings: The page includes the following settings
Object
• IP Address
• IP Subnet Mask
• Use Router As DHCP
Server
• Starting IP Address
• Ending IP Address
• WINS Server IP
• Accept
• Cancel

4.4.2 WAN Settings

Go to the "Operation Mode" page to configure the device as
to configure the device's WAN settings. The WAN settings should be provided by the ISP to configure the device's WAN settings.
Description Description
The LAN IP of the AP. The
The LAN subnet mask of the AP. The
Select it to enable DHCP server. In here the device is acting as a router. Select
Specify the starting IP address for Specify the starting IP address for the DHCP range.
Specify the ending IP address for the DHCP range. Specify the
Enter the IP address of the WINS server. Enter the IP address of the WINS server.
Click Accept to apply the setting. Click
Click Click Cancel to cancel the setting.
page to configure the device as "WISP" and then go to "Router
Figure 4-15 WAN Settings – All
User Manual of WAP
In here the device is acting as a router.
DHCP range.
DHCP range.
-35-
WAP-500N/WBS-500N
Router WAN Settings"
the ISP.