Monitor - Gateway E-9220T User Manual

Gateway e-9220t server user guide
Table of Contents

Advertisement

Chapter 6: Troubleshooting
If your system has a v.90 modem, the speed at which you can upload (send) data is limited
to 33.6K. If your system has a v.92 modem, the speed at which you can upload data is
limited to 48K. Your ISP may not support 48K uploads.
The modem is not recognized by your server
If the modem shares the telephone line with another device, make sure that the
telephone line is not in use (for example, someone is on the telephone, or another
modem is in use).
Shut down and restart your server.
Reinstall the modem device driver. For more information, see Using Your System
Companion CD.
Open your server and reseat the modem. For more information, see
expansion cards" on page

Monitor

Your server is running but there is no picture
Adjust the brightness and contrast controls to the center position.
Make sure that the monitor is plugged in and turned on. If the monitor is turned
on, the power LED should be lit.
Check the port and cable for bent or damaged pins.
Connect your monitor to another computer, or connect a monitor that you know
works to your server.
The color is not uniform
Make sure that the monitor warms up for at least 30 minutes before making a final
judgment about color uniformity.
Make sure that:
The monitor is not positioned too close to another monitor, electric fan, or
fluorescent light.
You demagnetize the screen using the monitor's degauss feature. For more
information on degauss, see the monitor's documentation.
84
47.
www.gateway.com
"Installing PCI

Advertisement

Table of Contents
loading

Table of Contents

Save PDF