Gateway E-9220T User Manual page 62

7
Insert the new fan into the opening left by the old fan, then engage the fan retention
tabs and fan release tab with the chassis until it snaps into place.
8
Plug the fan cable into the fan connector on the system board.
9
Replace the processor air duct by following the instructions in
air duct" on page
10
Follow the instructions in
To replace a back fan:
1
Follow the instructions in
2
Follow the instructions in
3
Unplug the fan cable from the fan connector on the system board.
34.
"Closing the server case" on page
"Preventing static electricity discharge" on page
"Opening the server case" on page
www.gateway.com
Replacing a fan
"Installing the processor
37.
29.
30.
Fan cable
Fan retention
screw
Fan retention
screw
57