Installing PCI expansion cards
Use the following chart to determine the PCI slot into which you should install your
expansion card.
Caution
To replace, add, or reseat a PCI expansion card:
1
Follow the instructions in
2
Follow the instructions in
3
If you are replacing a card, disconnect any cables that are attached to the old card.
This server does not have PCI hot-plug capability. Do not attempt to
install or remove a PCI card without turning off your server and
disconnecting it from the AC power source.
PCI slot
Description
1
PCI Express - x1
2
PCI Express - x8
3
PCI - Runs at 32-bits
4
PCI Express - x4
5
PCI - Runs at 32-bits
"Preventing static electricity discharge" on page
"Opening the server case" on page
www.gateway.com
Installing PCI expansion cards
PCI slot 1
PCI slot 2
PCI slot 3
PCI slot 4
PCI slot 5
30.
29.
47