Memory Online Sparing - Gateway E-9220T User Manual

Chapter 4: Installing Components
To install or replace memory:
1
Follow the instructions in
2
Follow the instructions in
3
Pull the plastic tabs away from the sides of the memory module slot. If you are
replacing a memory module, remove the old module.
4
Align the notch on the new module with the notch in the memory module slot and
press the module firmly into the slot. The tabs on the sides of the memory slot should
secure the memory module automatically.
5
Follow the instructions in
6
Restart your server and open the BIOS Setup utility. Verify the
in the Main menu. When you exit the BIOS Setup utility, make sure that the operating
system loads completely.
46
"Preventing static electricity discharge" on page
"Opening the server case" on page
"Closing the server case" on page
www.gateway.com
29.
30.
37.
listed
System Memory