Gateway E-9220T User Manual page 25

Chapter 3: Maintaining Your Server
3
Select the password to set according to the following table.
Option
Supervisor password
User password
4
Type the password and press E
5
Save your changes and exit the BIOS Setup utility.
20
Description
To control access to system configuration, set a supervisor password.
Using a supervisor password lets you make changes to any setting
in the BIOS.
Passwords can be cleared. To clear the passwords, see
BIOS passwords" on page
The supervisor password must be set up before a user password can
be set. To control access to the server, set a user password. The
supervisor can set the level of access granted to the user password.
The user password access levels are:
No Access. User cannot access the BIOS Setup utility.
■
Limited. User can change only the date and time.
■
View Only. User can see all settings, but cannot change them.
■
Full. User can change every setting except the supervisor password.
■
Passwords can be cleared. To clear the passwords, see
BIOS passwords" on page
, then type it again and press E
NTER
www.gateway.com
69.
69.
"Resetting
"Resetting
.
NTER