9
Pull the system board away from the case and carefully remove it, then place it in a
static-free bag on a stable work surface.
10
Insert the new system board into the case, aligning the holes in the board with the
threaded standoffs on the side of the case.
11
Secure the system board to the case with the seven (7) screws you removed previously.
12
Reinstall the memory by following the instructions in
page
45.
13
Reinstall the processor and heatsink by following the instructions in
processor" on page
14
Connect the power and data cables.
15
Reinstall the expansion cards by following the instructions in
expansion cards" on page
16
Follow the instructions in
51.
47.
"Closing the server case" on page
www.gateway.com
Replacing the system board
"Installing memory" on
"Replacing the
"Installing PCI
37.
63