Monitor - Gateway 920 User Manual

Hide thumbs Also See for 920:
Table of Contents

Advertisement

If your system has a v.90 modem, the speed at which you can upload (send)
data is limited to 33.6K. If your system has a v.92 modem, the speed at which
you can upload data is limited to 48K. Your ISP may not support 48K uploads.
The modem is not recognized by your server
If the modem shares the telephone line with another device, make sure
that the telephone line is not in use (for example, someone is on the
telephone, or another modem is in use).
Shut down and restart your server.
Reinstall the modem device driver. For more information, see
Server Companion
Open your server and reseat the modem. For more information, see
"Installing PCI expansion cards" on page

Monitor

Your server is running but there is no picture
Adjust the brightness and contrast controls to the center position.
Make sure that the monitor is plugged in and turned on. If the monitor
is turned on, the power LED should be lit.
Check the port and cable for bent or damaged pins.
Connect your monitor to another computer, or connect a monitor that
you know works to your server.
The color is not uniform
Make sure that the monitor warms up for at least 30 minutes before making a
final judgment about color uniformity.
Make sure that:
The monitor is not positioned too close to another monitor, electric fan,
or fluorescent light.
You demagnetize the screen using the monitor's degauss feature. For more
information on degauss, see the monitor's documentation.
CD.
www.gateway.com
40.
Troubleshooting
Using Your
79

Advertisement

Table of Contents
loading

Table of Contents