Preparing To Install Components; Selecting A Place To Work; Gathering The Tools You Need - Gateway E-9220T User Manual

Chapter 4: Installing Components

Preparing to install components

Selecting a place to work

Work on your server in an area that:
Is clean (avoid dusty areas)
■
Is a low-static environment (avoid carpeted areas)
■
Has a stable surface on which to set your server
■
Has enough room to place all of your server parts
■
Is near a grounded outlet so you can test your server after installation
■
■ Is near a telephone (in case you need help from Gateway Customer Care). The
telephone must be directly connected to a telephone jack and cannot be connected
to your server.

Gathering the tools you need

Some tools and supplies that you may need to work on your server are:
A notebook to take notes
■
A Phillips screwdriver
■
A small flat-blade screwdriver
■
Small containers to store various types of screws
■
■
A grounding wrist strap (available at most electronic stores)
28
www.gateway.com