Table of Contents
Advertisement
Chapter 4: Installing Components
Accessing the internal components
Opening the server case
Because the components inside your server are extremely sensitive to static electricity, make
sure that you follow the instructions at the beginning of this chapter to avoid static
electricity damage.
Caution
To open the server case:
1
Follow the instructions in
2
Turn off the server, then unplug the power cords and all other cables connected to
the server.
Warning
3
Remove the case cover thumbscrew.
4
Lift the cover release lever.
30
For correct cooling and air flow, always reinstall the side panel and
the air duct (if included) before you turn on the server. Operating the
server without the cover in place can damage server components.
"Preventing static electricity discharge" on page
This server may have two power cords. To disconnect internal
AC power, you must unplug both power cords.
www.gateway.com
29.
Advertisement
Table of Contents
Troubleshooting
