Changing The Volume Using An Expression Pedal; Connecting An Expression Pedal; Activating The Expression Pedal; To Change The Volume Of Pr-300 Parts - Rodgers PR-300 Owner's Manual

Changing the Volume Using an Expression Pedal
Normally, the volume of Parts is controlled from
external MIDI devices, such as a Rodgers organ or a
Rodgers keyboard equipped with an expression pedal.
If the device you are using to control the PR-300
doesn't allow you to change the volume of PR-300
parts, you can attach a compatible expression pedal to
the PR-300 and change the volume of PR-300 parts
by moving the pedal.
Connecting an Expression Pedal
Plug a compatible expression pedal into the jack
marked EXPRESSION on the back panel of the
PR-300.
Activating the Expression Pedal
_ _ _ EXTCONTROl. _
STARTI PUNCH
STOP INIOUT EXPRESSION
(1) While holding down the [SIDFf] button, press
the [EXPRESSION] button.
METRO BEAT
EXPRli)
These buttons are located under the top cover.
(2)
Rotate the alpha-dial until the display changes
to "On".
The expression pedal will now be able to control
the volume of PR-300 parts.
(3) Press [ENTER] to return to the Play screen.
To Change the Volume of PR·300 Parts
By moving the pedal with your foot, you
can now control the volume of the Part
listed in the screen after pressing the
[SOUND] button. Only the Part selected
after pressing the [SOUND] will change
when the expression pedal is moved.
. Any movements of the expression pedal
which are made during a recording will
also be recorded.
91
(1)
•
E::-::PF.~E55 I Ot-4 Peda 1
"'On