Preparing The Organ For Multi-Track Recording; Preparing The Pr-300 For Multi-Track Sequencing - Rodgers PR-300 Owner's Manual

Preparing the Organ for Multi-Track Recording
Your Rodgers organ is nonnally set to perfonn a single-pass
recording, as is covered earlier in this manual. In order to record
a Multi-Track Sequence, there are a few things which need to be
done to the Rodgers organ before recording can take place.
Please refer to the MIDI Phase II User's Manual for your
particular organ if you're not sure how to
carry
out the following
procedures.
To prepare the organ for Multi-Track recording:
(1) Turn off the organ's MIDI Master Channels.
This tells the organ to only send infonnation for the
MIDI couplers when notes are pressed or the
expression pedals are moved. This way, only MIDI
infonnation for the PR-300 voices will
be
recorded.
To suppress the MIDI Master Channels, hold SET
and press a MIDI coupler (it will flash), release
SET then press CONTINUO. For more
infonnation, see the MIDI Phase II User's Manual.
Preparing the PR·300 for Multi·Track Sequencing
Next, the PR-300's master clock must be disabled
(the "Clock Out" function is used for single-pass
record).
To disable the PR-300's master clock:
(1)
Press [MIDI].
This button is located under the top cover.
MIDI
DISK
Turn Off Organ's
Master Channels
(2) Rotate the alpha-dial until the screen at right
appears in the display.
This is the screen where the master clock is enabled
and disabled.
(3) Press [TEMPO] to move ...... prompt to the end
of the second line.
59
t' 1 I DI
~·r:
In.-.k Ot~t.
:On
- -
-
.
TEMPO
J=
r' 1 I r'!
T
-
I
z..o
.a.
Clock
Out. ~'On
~