Saving A Sequence To Disk - Rodgers PR-300 Owner's Manual

Then, the correct organ registration and PR-300
sounds will be recreated every time the sequence is
played.
(10) Play the song you wish to record.
In the event that the song is too long for the PR-300
to record, the display will read "MEMORY FULL -
PRESS STOP".
(ll)When you are finished playing, press General
Cancel [0] on the organ.
(12) Press [STOP] on the PR-300 to stop recording•
The light above the TRACK 1 button will be green,
indicating that it is storing the song you just
recorded.
To playback your sequence:
(1) Press [RESET] to return the PR-300 to the first
measure of the sequence.
(2) Press [PLAY] to start playback.
The PR-300 will playback the song you just
recorded. Press [STOP] at any time to stop
playback.
Saving a Sequence to Disk
The sequence you just recorded is stored in the PR-
300's memory. It can be played back or added at
this time.
However, when you turn the PR-300 off, this
sequence will be erased. For this reason, you can
save sequences to 3.5" floppy disks. Once a
sequence has been saved to a disk, it can be
recalled and played at any time.
31
..
•
PLAY
Press [RESET] then press
[PLAY] to hear the
sequence you've just
recorded.