Changing The Metronome Resolution And Tone - Rodgers PR-300 Owner's Manual

Changing the Metronome Resolution and Tone
You can change the resolution and tone of the
Metronome built into the PR-300. There are six
different resolutions and two different tones to choose
from.
To change the Metronome's resolution and/or tone:
(1) Press [METRO BEAT].
(2) Rotate the alpha-dial to change the note at the
cursor's position in the screen (this note
indicates the Metronome's resolution).
For example, if the resolution is set to quarter notes
in a 4/4 time signature, you'll hear 4 beats in each
bar. If it is set to eighth notes, 8 beats will be heard
in each bar.
*If you change these settings anytime after you've
pressed the [REe] button to start a recording, the
changes will be recorded along with other material.
A
n*"
mark next to a note indicates the resolution
was set at the time the song was recorded.
METRO BEAT
-
E XPRESSION
t'1ETF.~O
BERT
1lrJ"
Tonel
j
T
Available resolutions:
T
Field for selecting tone
(3) Move the cursor over to the Tone setting with
the
[>]
button. A choice of TONE 1 (a
combination bell and click sound) or TONE 2
(an electronic sound), can be selected with the
alpha-dial.
(4) Press [ENTER] to confirm the changes made.
The Play Screen will return.
•
TRANSPOSE
tJ~::::!!~:!!~::~1
t'1ETF.~O
1lrJ"
BERT
Tonel
i
98