Using Chain Play - Rodgers PR-300 Owner's Manual

Using Chain Play
The PR-300 is equipped with a Chain Play
function which plays all songs on a disk in order.
When Chain Play is enabled, the PR-300 will play
each song in order, starting with the ftrst song on the
disk.
The PR-300 will not stop at Pause Marks when in
the Chain Play mode.
To start Chain Play:
(1) Insert desired disk into the disk drive.
(2)
If
you want to play all songs on the disk over
and over again, press the [REPEAT] button so
the indicator lights. If you want them to play
through once, turn the Repeat function otT.
(3) Press [CHAIN PLAY].
This button is located underneath the top cover.
Playback will start with the first song on the disk.
(4) Press [STOP] at any time to stop Chain Play.
97
•
REPEAT
-
CHAIN PLAY
-
P AUSE MARK
..