Using A Pedal To Start And Stop The - Rodgers PR-300 Owner's Manual

Using a Pedal to Start and Stop the PR-300
Normally, you'll use the Play and Stop buttons to
start and stop playback and recording of the PR-300.
It is possible, however, to use a pedal to start and stop
the PR-300, allowing you control from a remote
location.
In order to make use of this feature, you need to
have a DP-2 or compatible pedal (sold separately).
To start or stop the PR-300 using a DP-2 pedal:
(1) Connect the DP-2 (or compatible) pedal
to the jack labeled "START/STOP" on
the back of the PR-300.
(2) Press the pedal and release to begin
playback (or record).
To start the PR-300 recording, you must
fIrst press
[REel
and select a track.
(3) Press the pedal and release to stop
playback or record.
_ _ _ EXTCONTAOI. _
STAATI PUNCH
STOP "'OUT EXPRESSION
000
..
90