Channels - Rodgers PR-300 Owner's Manual

Channels 1-10
The default for channels 1·10 is "Internal". This allows you to
control the sounds of the PR-300 on channels 1·10 from an
external MIDI keyboard or Rodgers organ.
If this switch is set to "External", then channels 1-10 will be used
to control sounds in an external MIDI device.
If you would like to confrrm that this group of MIDI channels is
set to "Internal", follow this procedure:
(1) Press [MIDI].
This button is located under the access panel.
(2) Press
[REA
T] if the" prompt is not at the
beginning of the second line.
The position of the .. prompt determines which
field in the display will be changed when the alpha-
dial is rotated. The .. prompt can be easily moved
by pressing the [BEAT] and [TEMPO] buttons.
(3) Rotate the alpha-dial until "I-lOch Out : nnn"
appears in the display.
If this screen reads "I-lOch Out : Int", then
channels 1-10 will be used to play the PR-300's
internal sounds (i.e., the PR-300 is set correctly for
use with an external MIDI keyboard or Rodgers
organ).
MIDI
DISK
BEAT
"
t' 1 I DI
!!r5'::It"IC :
I nt.
!
T
Press [SEA 1] if .. prompt
isn't at this location.
1"1IDI
iir1-1[1Ch Ol.~t
:Int
Rotate the alpha-dial until
this screen appears.
If this field reads "lnt", then the PR-
300 is set correctly. Press [ENTER]
to return to the Play Screen.
Press [ENfER]
to
return
to
the Play Screen.
If you wish to change the display, go to step 4.
TEMPO
J= -
~
t' 1 I DI
1-1 [1ch Out. prE::d..
(4) Press [TEMPO] once to move" prompt to the
immediate left of the last field in the display
IlntlExt".
(5) Rotate the alpha-dial to change field to desired
setting.
(6) Press [ENTER] to return to the Play Screen.
19
TRANSPOSE
tJ~:::!!~!!::::~~
If this field reads "Ext", press
[TEMPO] to move the.' prompt and
rotate the alpha-dial to select "lnt".
Then, press [ENTER].