Setting Tempo Record; Sync Recording - Rodgers PR-300 Owner's Manual

Setting Tempo Record
If you want the PR-300 to record the
tempo changes of the external MIDI
device, then you need to tum the PR-300's
Tempo Record function on.
If you want the PR-300 to ignore tempo
changes of the external MIDI device, tum
the PR-300's Tempo Record function off.
To turn the PR-300's Tempo Record
function on or off:
(1) Press [TEMPO REC].
(2)
Rotate the alpha-dial to select either "On" or
"Off", then press [ENTER].
Sync Recording
Once everything is connected and set
correctly, all that is left is to record the
infonnation on the PR-300.
To Sync Record:
(1)
Press the [RESET] button, if necessary, to move
to the first measure of the recording.
(2)
Press the [REC] button.
The red light above the [REC] button will blink.
(3) Press the [BEAT] button and rotate the alpha-
dial to match the Time Signature with that of
the song being recorded.
If you don't match the Time Signature with that of
the song being recorded, the measure numbers on
the PR-300 will not match up.
TEMPOREC
-
P UNCH IN/OUT
RESET
IBII
BEAT
TEt'1PO F.~EC
IP-Off
(4) Press the track button you wish to record on.
o
o
0
TRACK
o o
(5) On the external sequencer, start playback of the
song to be recorded.
The PR-300 will start recording when the external
sequencer starts playback.
(6) Stop the external sequencer (if necessary) at the
end of the recording.
The PR-300 will stop when the external sequencer
stops.
When you are finished, return Sync and Tempo Record to their normal settings.
111