Recording Parts 2, 3 And 4 - Rodgers PR-300 Owner's Manual

There is a way to select an alternate volume for a
part; see "Changing the Expression Setting of a
Part" for more information.
(15) Press [STOP] when you are rmished recording
the first part.
If you make a mistake, press [RESET]
to
return the
PR-300 to measure 1 and record the part again
using steps 11 through 14.
(16) Press [RESET] to return the PR·300 to measure
1.
You can also use the BWD key to return to
measure
1.
RESET
l1li
~ :+:t·iEbJ 5 Ot·i13
1 4.···"4 J=12[1
(17) Press [PLAV] to listen to the part you just •
recorded.
PLAY
Congratulations! You have just recorded the first track
of a Multi-Track Sequence!
Recording Parts 2, 3 and 4
Part 2 Channel 2 Track 2 French Horn
1$'
e
By following the instructions above, you were
able to record the first part of a multi-track sequence.
Now it's time to record Parts 2,3 and 4.
Go through the procedure above again; once for
Part 2, once for Part 3 and once for· Part 4, using the
following MIDI channels, tracks, and instruments:
Part 3 Channel 3 Track 3 Clarinet
Channel Instrument
Part 2
Part 3
Part 4
2
3
4
Track 2
Track 3
Track 4
French Horn
Clarinet
Cello
Part 4
Channel 4 Track 4 Cello
For instance, when recording Part 2, you will
select MIDI channel 2 as the send channel from the C-
lOO/C-220 (instead of using MIDI Channell, as
before), assign the "French Horn" voice to Part 2
(instead of Trumpet on Part 1) and use Track 2
(instead of Track 1).
76