Creating Your Own Count-In Phrase - Rodgers PR-300 Owner's Manual

Creating your Own Count-In Phrase
When the Count-In feature is activated, the PR- .
300 will give you two measures of introduction. If
the Count-In feature is not activated, you will either
hear the music in the two measures preceding the start
of the recording or two measures of silence, if no
music exists in the two measures before the record
point. (The Metronome click will be heard if the
Metronome feature is activated).
If desired, you can change the two measure
introduction which is used by the Count-In feature.
The new Count-In Phrase can
be
up to two measures
in length and will
be
saved along with the song.
To change the Count-In phrase:
(1)
Record a two-measure drum pattern anywhere
on any track.
For more information, see "Recording Rhythm
Parts" on page 95.
(2) Store the two measure rhythm pattern in the
scratchpad using the Erase, Cut or Copy
functions.
For more information, see "PR-300 Editing
Features" on page 115.
(3) Press the [PASTE] button, then press [COUNT
IN].
COpy
-
T RANSPOSE
PASTE
ERASE
•
COUNT IN
PR5TE
F.~EP
Tt-· Beat.
lir C 4.···"4
The screen at right will appear in the display.
(4) Press [ENTER] to Paste in the new Count-In
Phrase. The Play Screen will return.
The two-measure phrase which was pasted in will
be used whenever the Count-In feature is enabled.
If you Erase or Cut the custom Count-In phrase (by
pressing [ERASE] or [CUT] then [COUNT
IN]
and
[ENTER)), then the default Count-In phrase will
again be used.
TRANSPOSE
LJ~~:~~j:!;j:!jj:~jl
Replace
CUT
Count-In Current
Time
Signature
Tt-· Beat.
lir C 4.···"4
119