Copy, Erase Or Cut, Then Paste - Rodgers PR-300 Owner's Manual

Pause Marks and markers located after the
cut point will move with the data. PASTE (Merge)
You can specify the measure, and track(s)
to
be
cut.
PASTE·--takes the data placed on the
scratchpad
by
Copy, Erase, and Cut
functions and places it at the location you
specify.
You can select whether to have the data
"Merged" (combined with existing data) or
"Inserted" (moving existing data to make
room) at the Paste-In point.
I··· ....
PASTE (Insert)
1·······<>·>···
rl!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!l
from
scratchpad
from
scratchpad
I······ ·• •
·.·<·....•.........
i • • • • •
I!!i l l l l ! !l i l l l ! !I!!l i l i l l 1 1111111!11111111111!l l l l l l l ! !l l l l l l l l ! !I..........>..
..i. . · . \ ,
COPY
CUT PASTE
-
TRANSPOSE QUANTIZE SHIFT ERASE
-
() ()
~
(2) Specify the portion of the song to be Copied,
Cut, or Erased (and thereby copied to the
scratchpad) using the
[<]
button,
[>]
button, and
alpha-dial.
Copy,
Erase or Cut, then Paste
(1) To Copy or Cut, press the [COpy] or the [CUT]
button. To Erase, hold [SHIFT] and press the
[ERASE] button.
COPY M Tr Part
• i-END
~ll ~ll
ER~SE
M Tr Part
• i-END
~ll ~ll
Song Section-a-this field specifies the number of
measures affected by the Copy, Cut or Erase
function. For instance, if you set this to "I - 9",
then measures 1 through 8 would be affected.
You can set the start and end points with the alpha-
dial (as mentioned above), or you can use the
[MARKER A] and [MARKER B] buttons. Please
note that, if a marker is placed in the middle of a
measure and you press its button to specify the start
or end point, the PR-300 will use the beginning of
the measure which contains the marker as the start
or end point of the operation.
Song Section
Song Section
Track Part
Track Part
CUT M Tr Part
• i-END ~ll ~ll
You can select 1 (or PU if a Pick-Up measure
exists) to specify the beginning of the song. You
can select "END" to specify the end of the song.
Track---This lets you specify which track(s) will
be affected by the Copy, Cut or Erase operation.
You can select a single track by rotating the alpha-
dial (or simply pressing the appropriate track
button) or select all tracks by rotating the alpha-dial
until "ALL" is selected.
Song Section
Track
113