Starting Playback; Stopping Playback; Starting Playback Again From The Beginning; Channels - Rodgers PR-300 Owner's Manual

~ ~_I:t'11_1~"""~::It~t_. v_~~~
II'" p" '_' '_"_'
Starting Playback
(3) Press the PLAY button to start playback of the
song. The light on the [PLAY] button
will
come
on.
~
'-'
&
T
4.····4
J=12~]
• Adjusting the Volume
Adjust the volume of the PR-300 using the volume
control on the PR-300.
Stopping Playback
(4) Press the [STOP] button to stop playback of the
song. The light on the [PLAY] button
will
go
out.
*A
"+"
sign (located to the left of the measure
number in the display) indicates that play was
stopped in the middle of a measure.
*You can repeat the song over and over again.
Simply press the [REPEAT] button so that its light
comes on before pressing [pLAY].
Starting Playback Again from the Beginning
To return a song to the beginning of the first
measure:
(1) Press the [RESET] button. The measure number
will reset to "1".
*For songs that begin with pickup notes, the display
will read "PU", indicating that you're starting from
the very fIrst note of the song.
(2) Press [pLAY] again to start playback.
11
Displays the current measure number
VOLUME
~.
::5:
t'1ozat-·t. K-336
+
9 4.····4 J=12[1
•
T
This shows that play was stopped in
mid-measure
1 4.····4 J=12[1
Measure indicator returns to "I" (or
"PU" for songs with pickup notes).