Activating And Muting Tracks - Rodgers PR-300 Owner's Manual

Activating and Muting Tracks
The PR-300 is equipped with five tracks. These
tracks store recorded music. The music on one track
can be manipulated without affecting the music on
other tracks.
Four of the tracks on the PR-300 can be used to store
any type of music. These tracks are labeled "1 ", "2",
"3" and "4".
One of the tracks is used to store rhythm or drum
parts. It is labeled "R" (for "rhythm" track).
When music is stored on a track, the light above the
track is green; During playback, you can mute a track
by pressing its button.
To learn more about tracks, follow this example:
(1) Select the song "Mozart K-336" on the Demo Song
Disk by pressing [SONG) and rotating the alpha-
dial.
Two track lights will be green; Track 2 (which has the
organ part) and Track 4 (which has the orchestra part).
SONG
~
I
•
IiiI
~5: t'1ozat-·t. K-336
1 4.····4li:-J=12[i
Track 4 is silenced
Track 4 is reactivated
(2) Press [PLAY) to start playback.
(3) Press [TRACK 4) so the green light goes otT.
The orchestra part stored on track 4 will be silenced.
(4) Press [TRACK 4) again so the green light is turned
back on.
The orchestra part stored on track 4 will play again.
*
Any track which has a green indicator light can be
muted and activated by following this procedure.
*
An indicator which does not tum green when pushed
denotes an empty track.
15
o
o
-
o
o
o
o
o
•