Formatting A Disk - Rodgers PR-300 Owner's Manual

Formatting a Disk
You must format a disk before it can be used on
the PR-300. The PR-300 can fonnat either HD (High
Density) or DD (Double Density).
Formatting disks erases all information stored on
them. Make sure there is no information on the disk
which you want to save before you format it. It is
impossible to retrieve any information lost by
formatting a disk.
To format a disk:
(1) Remove any disks from the PR-300's drive.
(2) Hold [SHIFT] and press [DISK].
These buttons are located underneath the top cover.
(3) Rotate the alpha-dial to select "Disk Format".
(4) Press [ENTER].
The PR-300 will ask you
to
insert a new disk (you
can also insert a previously used disk that you want
to erase and re-fonnat).
(5) Insert the disk to be formatted.
MIDI
- -
2)
Drs
•
DISK
• .Disk
ForMat
D i ::;.k
FOt-'p'lat
I
n::;.el·-·t.
t·iel..
. !
D i ::;.k
(6) Press [ENTER] to start formatting process.
The PR-300 will take a few minutes
to
fonnat the
disk. When it is finished, the Play Screen will
return.
126