Selecting Reverb And Chorus Type; Selecting Reverb; Selecting Chorus - Rodgers PR-300 Owner's Manual

Selecting Reverb and Chorus Type
SOUND
The PR-300 has eight different Reverb and eight
different Chorus effects which can
be
chosen.
(1) While holding down [SHIFT], press
[EFFECTS].
Selecting Reverb
(2)
Rotate the alpha-dial to select the type of Reverb
desired.
EFF(S
lP-F.~e'.)et··b:
Ha 11 2
Chor'us: Chot-·tt::. 3
Selecting Chorus
(3)
Press the
[>]
button to move the cursor to the
"Chorus:" setting. Rotate the alpha-dial to
select the type of Chorus desired.
F.~el.}Elt-·b:
Ha 11 2
jP·Chot-·t4:=. : ChOt-·t4:=. 3
Reverb
Chorus
/-
Play Screen
Settings executed
(temporary)
Chorus with feedback
WRITE
-
TUNE
t
,
TRANSPOSE
i ~jj~jjj!!![!j!j~jji
t
Play Screen
Settings executed
(permanent)
TRANSPOSE
tJ:jjj~!!~j!j![jjjj
Delay with a short delay time
Chorus adding a slight waver to sounds
Echo with the rising and falling sound
of a iet engine
Short delay with a high repeat frequency
..
Flanger
Chorus 1,2,3,4
S.D.FB
(Short Delay FB)
S. Delay
Feedback
(Feedback Chorus)
89
Pressing [WRITE] or [ENTER] then [ENTER] will
cause changes to become permanent. These
changes will be retained when the song is saved to
disk.
Pressing [WRITE] or [ENTER] then [STOP] will
cause all settings to be temporary.
If you press [STOP] the PR-300 will return to the
Play Screen and all changes you've made will be
stored temporarily. The temporary settings will not
be saved when you save the song to a disk.
Returning to the beginning of a song by pressing
[RESET] or [BWD] will cause the original settings
to return.
(4) After you've selected the type of Reverb and
Chorus you desire, you can execute these
settings in two different ways.
Room 1,2,3 Three Room Settings
Hall 1, 2 Reverb giving a sense of depth,
as
within a concert hall
Plate Plate echo (reverb using vibrations from
a metal plate)
Delay Standard delay (echo effect)
Panning Delay with the sound moving from side
(panning Delay) to side