W/Other Rodgers Organs & Keyboards - Rodgers PR-300 Owner's Manual

PR-300
--_
. .
~---
000
Other Rodgers
Organs and Keyboards
AC Adaptor Connection
Connect the appropriate end of the AC Adaptor to the DC IN
9V jack. Connect the other end to a standard AC outlet.
EXTIINTswitch
The PR-300 is equipped with a switch which determines how
MIDI channels 11-16 are used.
When this switch is set to "EXT", channels 11-16 are used to
control external devices, such as Rodgers organs, and will be
transmitted from the PR-300's OUT jack.
When this switch is set to "INT", channels 11-16 are used to
control internal GS sounds and are not transmitted from the
PR-300's OUT jack.
Loop the power cable around the special cord hook the the
back of the PR-300 to help prevent the adaptor from being
accidentally unplugged in the middle of a performance.
Cord Hook
To power outlet
7
EXT/INT Switch
r
.....
EXT II:JINt
When the PR-300 is
connected to a Rodgers organ
with sequencing capabilities
(MIDI Phase II or later), this
switch should be set to
"EXT".