Table of Contents
Advertisement
Remote Host:
Remote host IP address or domain name
Remote Port:
Remote host port number
Local Port:
Local port number (0~65535; avoid used port)
Bind Local Port:
Only valid in TCP client mode
UART Setting
Setting
Description
Baud Rate:
1200bps ~ 1,152,000bps
Data Bit:
7 or 8 bits
Parity:
NONE, ODD or EVEN
Stop Bit:
1 or 2 bits
Flow Control:
NONE or "CTS/RTS mode"
Save Settings: Click to save all these settings
Reset: Click to Restart (Need to click "Save Settings" to apply the setting)
7.3 Advance Options
Figure below shows the advance settings page of WIZS2E module.
Device Name: The module name, the user could make its own definition, it could be any
characters. Maximum 15 bytes
NETBIOS Enable: NetBIOS option, checked the NetBIOS to activate this feature, default:
disable; if activated, the user could type the device name (case insensitive) in the browser
to login to the webserver of this module.
HTTP Port: W7500S2E's web server port number, default: 80; value range is 0 to 65535.
W7500S2E user manual
W7500S2E serial to Ethernet module
Figure 7-4 Advance Options page
44
192.168.1.99
5000
5000
Disable (uncheck)
Default
115,200
8
NONE
1
NONE
Advertisement
Table of Contents
