Operating Your Fireplace; Fireplace Control Devices - Valor 1000KP Homeowner's Manual

Operating your fireplace

Fireplace control devices

There are two ways to control your fi replace.
1. Thermostatic Remote Control turns fi re ON, OFF,
controls fl ame height and can be programmed to
function automatically—see Appendix A - Remote
Control Operation on pages 22–25.
2. Wall Switch turns fi re ON, OFF and controls
fl ame height—see Appendix B - Wall Switch Opera-
tion on page 26.
Remote Control
Turn your fi replace ON
WARNING
STOP IF YOU SMELL GAS! DO NOT LIGHT!
See cover page immediately!
Press and hold:
- + buttons on remote, or
- ON-OFF button on wall switch
until a short beep confi rms the start sequence has
begun; release buttons.
Continuing beeps confi rm the ignition is in process.
The pilot lights up, then the fi replace.
If you need to light up the pilot manually, see the
Lighting Instructions card attached to the fi replace
—see page 7 to know how to access it. Also, a
copy of this card is reproduced in Appendix A of the
fi replace Installation Manual.
Wall Switch
Turn your fi replace OFF (including pilot)
Press and hold:
- button on remote, or
- ON-OFF button on wall switch
If the fl ames are on, they go down and you hear the
valve motor wind down. You hear a clunk and a beep
indicating that the valve has received the signal from
the remote control.
In the unlikely event that you cannot turn off your
fi replace with the remote control handset, use the
wall switch; if the wall switch malfunctions and
will not turn off the fi replace, wait 8 hours and the
fi replace will automatically go to pilot. You can then
access the controls inside your fi replace.
WARNING
Risk of severe burns! Surface of the
fi replace are very hot during operation!
Ensure fi repace has cooled off before
accessing control.
Alternately, turn off your house gas supply. In all
cases, call your dealer for service assistance.
ON:
parallel
to pipe
To use additional functions of your Remote
Control such as temperature or program
settings, visit valorfi replaces.com/remotes
OFF:
perpendicular
to pipe
9