Danfoss MCA 194 Operating Instructions Manual page 34

Parameter Mapping Lists
Parameter
Options
5 5
Table 5.144 Conversion of Parameter 416 Part 1
32
Operating Instructions
VLT 5000 series FC 302 series
416 Feedback Unit 3-01 Reference/
feedback Unit
[0] None [0] None
[1] % [1] %
[2] PPM [5] PPM
[3] rpm [2] RPM
[4] bar [71] bar
[5] Cycle/min Not supported
[6] Pulse/s [12] Pulse/s
[7] Unit s/s Not supported
[8] Unit s/min Not supported
[9] Unit s/h Not supported
[10] °C [60] °C
[11] Pa [72] Pa
[12] l/s [20] l/s
[13] m3/s [23] m3/s
[14] l/min [21] l/min
[15] m3/min [24] m3/min
[16] l/h [22] l/h
[17] m3/h [25] m3/h
[18] kg/s [30] kg/s
[19] kg/min [31] kg/min
[20] kg/h [32] kg/h
[21] t/min [33] t/min
[22] t/h [34] t/h
[23] m [45] m
[24] Nm [4] Nm
[25] m/s [40] m/s
Danfoss A/S © Rev. 2014-03-06 All rights reserved.
VLT 5000 series
Parameter 416 Feedback Unit
[26] m/min
[27] °F
[28] in wg
[29] gal/s
[30] ft3/s
[31] gal/min
[32] ft3/min
[33] gal/h
[34] ft3/h
[35] lb/s
[36] lb/min
[37] lb/h
[38] lb ft
[39] ft/s
[40] ft/min
Table 5.145 Conversion of Parameter 416 Part 2
VLT 5000 series
Parameter 417 Speed PID propor-
tional gain
Data range 0.000 – 0.150
Table 5.146 Conversion of Parameter 417
VLT 5000 series
Parameter 418 Speed PID Integral
Time
Data range 2.0 – 999.9
Table 5.147 Conversion of Parameter 418
VLT 5000 series
Parameter 419 Speed PID Differen-
tiation Time
Data range 0.0 – 200.0
Table 5.148 Conversion of Parameter 419
VLT 5000 series
Parameter 420 Speed PID D-gain
limit
Data range 5.0 – 50.0
Table 5.149 Conversion of Parameter 420
VLT 5000 series
Parameter 421 Speed PID low-pass
filter
Data range 5.0 – 200.0 ms
Table 5.150 Conversion of Parameter 421
FC 302 series
3-01 Reference/
feedback Unit
[41] m/min
[160] °F
[172] in wg
[121] gal/s
[125] ft3/s
[122] gal/min
[126] ft3/min
[123] gal/h
[127] ft3/h
[130] lb/s
[131] lb/min
[132] lb/h
[150] lb ft
[140] ft/s
[141] ft/min
FC 302 series
7-02 Speed PID propor-
tional gain
0.000 – 1.000
FC 302 series
7-03 Speed PID propor-
tional gain
2.0 – 20000.0
FC 302 series
7-04 Speed PID Differen-
tiation Time
0.0 – 200.0
FC 302 series
7-05 Speed PID Diff. Gain
Limit
1.0 – 20.0
FC 302 series
7-06 Speed PID Lowpass
Filter Time
1.0 – 100.0
MG37E102