General Instructions; Standard Toolkit - BMW C evolution Rider's Manual

General instructions

9
The "Maintenance" chapter de-
scribes straightforward proced-
96
ures for checking and replacing
certain wear parts.
Special tightening torques are lis-
ted as applicable. The tightening
torques for the threaded fasten-
ers on your vehicle are listed in
the section entitled "Technical
data".
You will find information on more
extensive maintenance and repair
z
work in the repair instructions
on DVD for your vehicle, which
is available from your authorised
BMW Motorrad dealer.
DANGER
Maintenance and repair work
not in compliance with cor-
rect procedure.
Danger to life due to electric
shock hazard.
Work not described here re-
quires special tools and a thor-
ough knowledge of the techno-
logy involved.
Carry out only the tasks
described in this section of
the manual. Perform the
tasks described only with the
ignition switched off. If in
doubt, consult your authorised
BMW Motorrad dealer.
DANGER
Work on the high-voltage
system.
Danger to life
The vehicle's high-voltage sys-
tem is a self-contained system.
Safety is ensured as long as no
work is attempted on the tech-
nical components.
Have all modifications and work
on the high-voltage system
carried out by an authorised
BMW Motorrad dealer with
suitably trained personnel.

Standard toolkit

1 Reversible screwdriver
blade
Phillips PH1 and Torx T25
Removing body panels.
2 Hook wrench
Adjusting spring preload
for spring strut ( 57).