BMW C evolution Rider's Manual page 100

9
WARNING
Brake-pad thickness less
98
than permissible minimum
Diminished braking effect, dam-
age to the brakes
In order to ensure the depend-
ability of the brake system, do
not permit the brake pads to
wear past the minimum per-
missible thickness.
Have the brake pads
replaced by an authorised
z
BMW Motorrad dealer.
Check rear brake pad
thickness
Make sure the ground is level
and firm and place the E-
Scooter on its stand.
Visually inspect the brake pads
to ascertain their thickness.
Viewing direction: from the
bottom right toward brake
pads 1.
Brake-pad wear limit,
rear
min 1.0 mm (Friction pad only,
without backing plate.)
If the brake pads are worn past
the minimum permissible thick-
ness:
ATTENTION
Parked vehicle rolls away
due to lack of braking power
if brake pads are worn past
their minimum permissible
thickness