Hazard Warning Lights System; Tem - BMW C evolution Rider's Manual

Short-press button 3 to switch
on the automatic daytime riding
light.
Option indicator 4 is high-
lighted.
appears on the display.
When ambient brightness
drops below a certain value,
the low-beam headlight is
automatically switched on (e. g.
in a tunnel). When sufficient
ambient brightness is detected,
the daytime riding light is
switched back on. When the
daytime riding light is active,
the daytime riding light symbol
is displayed in the multifunction
display.
Short-press button 3 to switch
off the automatic daytime riding
light.
Option indicator 4 is not high-
lighted.
Manual operation of the
light when the automatic
system is switched on
If you press the button for the
daytime riding light, the daytime
riding light is switched off and
the low-beam headlight and front
side lights are switched on (e. g.
when you ride into a tunnel, and
the response of the automatic
daytime riding light to the change
in ambient brightness is delayed).
If you press the button again the
daytime riding light is reactivated,
in other words the daytime riding
light is switched on again when
ambient light is bright enough.
Hazard warning lights
system
Operating hazard warning
flashers
Switch on operational readi-
ness ( 40).
NOTICE
The hazard warning flashers
place a strain on the 12 V
battery. Do not use the hazard
warning flashers for longer than
absolutely necessary.
NOTICE
If you press a turn-indicator but-
ton while operational readiness
is switched on, the turn-indicator
function is activated instead of
the hazard warning flashers and
remains active until you release
the button. The hazard warning
flashers recommence flashing as
soon as the button is released.
4
45
z