BMW C evolution Rider's Manual page 59

Adjusting spring preload
for spring strut
Make sure the ground is level
and firm and place the E-
Scooter on its stand.
If you want to increase spring
preload, use hook wrench 1
(on-board toolkit) to turn the
adjusting ring in direction A as
indicated by the arrow.
If you want to reduce spring
preload, use hook wrench 1
(on-board toolkit) to turn the
adjusting ring in direction B as
indicated by the arrow.
Basic setting of spring
preload, rear
Spring strut with spring ten-
sion fully relieved (One-up rid-
ing without luggage)
preloaded to 4 of 7 clicks
(Two-up riding and luggage)
5
57
z