General Instructions; Power Sockets - BMW C evolution Rider's Manual

General instructions

10
BMW Motorrad recommends the
use of parts and accessories for
114
your vehicle that are approved by
BMW for this purpose.
Genuine BMW parts and ac-
cessories and other products
which BMW has approved can
be obtained from your authorised
BMW Motorrad dealer, together
with expert advice on their install-
ation and use.
These parts and products have
z
been tested by BMW for safety,
function and suitability. BMW
accepts product liability for them.
Conversely, BMW is unable to
accept any liability whatsoever
for parts and accessories which it
has not approved.
CAUTION
Use of other-make products
Safety risk
BMW Motorrad cannot exam-
ine or test each product of out-
side origin to ensure that it can
be used on or in connection
with BMW vehicles without
constituting a safety hazard.
Country-specific official author-
isation does not suffice as as-
surance. Tests conducted by
these instances cannot make
provision for all operating con-
ditions experienced by BMW
vehicles and, consequently,
they are not sufficient in some
circumstances.
Use only parts and accessor-
ies approved by BMW for your
vehicle.
Whenever you are planning
modifications, comply with all
the legal requirements. Make
sure that the vehicle does not
infringe the national road-vehicle
construction and use regulations
applicable in your country.

Power sockets

Notes on use of 12 V power
sockets:
Operating electrical
accessories
The battery capacity is not
monitored while the 12 V
power sockets are being used.
The battery can become fully
discharged if auxiliary equipment
is used for a long time without
the high-voltage battery being
switched on. There is then no
longer any guarantee that the E-
Scooter will be able to start.
Cable routing
Note the following with regard
to the routing of cables from
12 V sockets to items of elec-
trical equipment:
Make sure that cables do not
impede the rider.