Protocol]; Other] - Fuji Xerox DocuCentre SC2022 User Manual

[IP Address]
Displays the IP address assigned to the machine. Enter the IP address when [IP Addressing] is set to [Manual
Input].
[Subnet Mask]
Displays the subnet mask assigned to the machine. Enter the subnet mask when [IP Addressing] is set to
[Manual Input].
[Gateway Address]
Displays the gateway address assigned to the machine. Enter the gateway address when [IP Addressing] is set
to [Manual Input].
[Modem Speed]
Select the communication speed and the duplex settings of Ethernet.
• [Auto]
• [10BASE-T Half]
• [10BASE-T Full]
• [100BASE-TX Half]
• [100BASE-TX Full]
• [1000BASE-TX Full]
[Disable IPsec]
Disables IPsec communication.
Note
• This setting is available only when [IPsec] is enabled on CentreWare Internet Services. For details, see the CentreWare
Internet Services Help.

10.9.4 [Protocol]

Specify whether to enable or disable each protocol.
• [LPD]
• [Port 9100]
• [FTP]
• [IPP]
*1
• [WSD Print]
*1
• [WSD Scan]
*2
• [SNMP UDP]
• [StatusMessenger]
• [Internet Services]
• [Bonjour (mDNS)]
• [Telnet]
• [Update Address Book]
• [HTTP - SSL/TLS]
• [Google Cloud Print]
*1
WSD stands for Web Services on Devices.
*2
SNMP stands for Simple Network Management Protocol.

10.9.5 [Other]

Configure the advanced network settings.
10 Changing the Machine Settings
247