Fuji Xerox DocuCentre SC2022 User Manual page 250

[Original Size]
Select the default document size to be copied.
When [Auto] is selected, the machine detects and specifies the document size automatically.
[Original Type]
Select the default document type.
[Lighten/Darken]
Specify the default copy density.
[Sharpness]
Specify the default sharpness level of the image.
When [Sharpen] is selected, the image is sharper, and when [Soften] is selected, the image is softer.
[Saturation]
Specify the default vividness level of color.
[Background Suppression]
Specify whether to suppress the background density of the document to enhance the copied image as the
default setting.
Tap to display the check mark to suppress the background density of the document.
[Color Balance]
Specify the default color balances of yellow, magenta, cyan, and black, each for low, medium, and high density.
[2-Sided]
Specify whether to copy on both sides of a sheet of paper as the default setting.
[1→1 Sided]
Copies one-sided documents into one-sided printouts.
[1→2 Sided]
Copies one-sided documents into two-sided printouts. Specify whether the printouts are bound at the long edge
or the short edge.
[2→1 Sided]
Copies two-sided documents into one-sided printouts. Specify whether the document is bound at the long edge
or the short edge.
[2→2 Sided]
Copies two-sided documents into two-sided printouts. Specify whether the printouts are bound at the long edge
or the short edge.
[2-Up]
Specify whether to copy two pages of a document to fit onto one side of a sheet of paper as the default setting.
[Off]
[Auto]
Copies two pages of a document onto one side of a sheet of paper. The zoom ratio is specified automatically.
[Edge Erase]
Specify the default margins to remove the shadows when copying a thick document or a booklet.
250
User Guide