Receiving A Fax - Fuji Xerox DocuCentre SC2022 User Manual

Opens the preview details screen.
Closes the Preview screen.
[Send]
Sends the fax.

Preview Details Screen
You can perform the following operations.
Switches the page to be displayed. You can also switch the page by flicking or swiping the screen to the right
or left.
Enlarges/reduces the preview.
Closes the Preview details screen.

7.1.2 Receiving a Fax

Note
• When the memory is full, you cannot receive a fax automatically. Delete any fax documents you no longer need from
the memory.
• If you receive a fax while you are copying or printing, or while the machine runs out of paper or toner, the machine
stores incoming faxes in the memory. And then, as soon as you finish copying, printing, or replacing the consumables,
the machine automatically starts printing the fax stored in the memory.
Receiving a Fax Automatically
To automatically receive a fax, set the fax receive mode to [FAX Mode], [TEL/FAX Mode], or [Ans/FAX Mode]. The
default setting is [FAX Mode].
Refer
• For details about the fax receive mode, see "[Receive Mode] (P.239)."
Note
• To use [TEL/FAX Mode] or [Ans/FAX Mode], connect an external telephone or an answering machine to the phone
connector on the right side of the machine.
166
User Guide