Using Windows Tools
Embedded Web Server: Using the X-Series Signal Analyzers Remotely
Accessing the Web Control SA tab
Selecting this tab lets you view, control and interact with the instrument
through the web server.
Step
Web Control SA
1. Click
Display Front Panel
2. Click
Keys
Notes
A password entry dialog appears.
By default, this password is set at the factory as
"measure4u". However, you may subsequently change the
System
password. (Press
Password
on the instrument front panel to change the
password.)
When the correct password is entered, the instrument
control web page appears.
NOTE
To view the instrument display, the
instrument application must be
running.
This brings up a virtual keyboard that can be used to control
the instrument.
99
I/O Config
Reset Web
,
,