User Accounts; Administrator Account; Instrument Accounts; Power Users Accounts - Keysight Technologies PXA N9030A Getting Started Manual

Instrument Operating System

User Accounts

User Accounts

The instrument ships with a number of different accounts already set up. In
addition you can create your own accounts if you desire. The privileges
associated with each account determine what you can and cannot do from that
account.

Administrator account

Using the Administrator account you can perform the following operations:
— Install software
— Configure network and printer access
— Access all files on the instrument
— Add or change user accounts and passwords
— Change Firewall settings
— Change Windows settings (e.g., using Device Manager)
— Change the time and date
— Run any application
The administrator password of "Keysight4u!" is for any instrument that shipped
from the factory branded as Keysight with firmware A.14.50 or later, or for the
instruments with a hard-disk upgrade or repair with A.14.50 firmware
pre-installed. For earlier instruments use "agilent4u" as the administrator
password.
Downloading A.14.5x firmware from the web and updating an existing Agilent
branded instrument Will NOT change the administrator password.

Instrument accounts

The default user account that ships from the factory is "Instrument" with the
password "measure4u". This user is a member of the standard Users group.
Using the Instrument account, you may perform the following operations:
— Configure network and printer access (although not local printer access)
— Access files on the instrument that are accessible to the Users group
— Run applications that are accessible to the Users group
1. In analyzers running the Windows XP operating system, the Instrument user account
was a member of the Power Users group.
47
1