Keysight Technologies PXA N9030A Getting Started Manual page 84

Using Windows Tools
Remote Desktop: Using the X-Series Signal Analyzers Remotely
Table 4-7 Starting a session
Step
4. Enter the login account name and
password.
Only the current User or an Administrator can remotely log into the
NOTE
instrument. To see who the current user of the instrument is, press Ctrl+Esc
on the instrument until you can view the current user name on the Start
menu. If no one is currently logged into the instrument, any valid instrument
user can remotely log in.
The instrument display appears on the screen of the remote computer.
Because the instrument front-panel keys are not available when using the
instrument remotely, three alternative methods are available to perform the
functions of the front-panel keys, as detailed in the following sections:
—
—
—
"Accessing menus for Remote Desktop operation" on page 88
"Keycode commands for Remote Desktop operation" on page 89
"The Virtual Front Panel" on page 93
Notes
The default account name is Instrument and the
default password is measure4u, but these
parameters may be changed by instrument users.
84