How To Locate The Computer Name Of The Instrument - Keysight Technologies PXA N9030A Getting Started Manual

Using Windows Tools
Remote Desktop: Using the X-Series Signal Analyzers Remotely
Remote computer running another version of Windows
You can use any version of Windows to install and run the Client software for
Remote Desktop Connectivity. However, you need to have available a Windows
installation CD-ROM, because that contains the Client software.
The following instructions relate to software provided by Microsoft
NOTE
Corporation. Keysight offers no warranty regarding the operation of such
software. The procedure described here may be changed by Microsoft at
some future time.
Table 4-4
Step
1. When the Welcome Screen appears,
2. From the
3. Click
4. To access the installed software, click

How to locate the computer name of the instrument

To connect a remote computer to the instrument, you need to know its
Computer Name. The Computer Name can be displayed as follows:
Table 4-5
Step
On the instrument front panel, press
Show
Installing the Client software
Perform add itional tasks
click
What do you want to do?
Set up Remote
screen, click
Desktop Connection
.
Next
.
Start All Programs
> >
Communications Remote
> >
Desktop Connection
.
Locating the name from the Keysight application
System
, .
Notes
The Remote Desktop Connection InstallShield
Wizard appears.
Follow the on screen instructions provided by
the Wizard.
Accessories
Notes
System A page listing various parameters appears.The
,
instrument's computer name is shown in the
list next to the title Computer Name.
82