Keysight Technologies PXA N9030A Getting Started Manual page 55

Instrument Operating System
Transporting a License Between X-Series Analyzers
Step
6 Get New License from
ASL Transportation Web
page
7 Save License File to USB
Flash Drive
8 Install License File in
Target Instrument
Action
a. Insert USB flash drive into PC that is
connected to the internet
b. On the PC, locate the *.url file on the
USB flash drive that was saved in the
previous step and click on it.
c. After a few seconds, the ASL
Transportation Web page will
appear. One field, the New Host ID
will be empty.
d. Enter the Host ID of the target
instrument (step 3 above) into the
field marked New Host ID.
e. Click Submit.
a. The ASL Transportation Web page
will indicate that a license file is
available and display two links to the
license file. Right-click on the
license file and select Save Target
As...
b. Save the license file to the root level
of the USB flash drive, keeping the
".lic" file extension.
c. Close the Save dialog and exit the
ASL Transportation Web page.
a. With the target instrument running,
insert the USB flash drive into one of
the front panel USB ports. After a few
minutes, you should see a message
saying "Successful License
Installation"
b. Cycle power on the target
instrument.
c. Once the analyzer has re-booted, the
application should be ready to use
on the target instrument.
Notes
The PC must have an internet connection
and an available USB port.
Most of the fields have been populated from
the information in the *.url file.
Be very careful when entering the New Host
ID. A mistake made in entering the New
Host ID will result in an invalid license being
issued. Be sure there is a comma between
the model number and serial number. There
should be no spaces in the Host ID.
Either link can be used to either display or
save the license file.
The license file must be saved to the root
level of the USB flash drive for it to be
recognized by the target instrument.
The Keysight License Services running on
the target instrument looks for *.lic files
whenever it detects a USB device has been
inserted. If the contents of the *.lic file are
appropriate for the instrument, the license
will be installed automatically.
Newly-installed licenses are only recognized
by the instrument software on power-up.
55