Using Windows Tools
Embedded Web Server: Using the X-Series Signal Analyzers Remotely
Table 4-11
Selecting the View & Modify Configuration tab
Step
1. Click
Configuration
2. Click
View & Mod ify
Mod ify Configuration
Notes
This displays a web page, which shows the instrument's
currently-assigned IP address and other TCP/IP
parameters.
A password entry dialog appears.
By default, this password is set at the factory as
"measure4u". However, you may subsequently change the
System
password. (Press
Password
on the instrument front panel to change the
password.)
When the correct password has been entered, the Modify
Configuration web page appears.
97
I/O
Reset Web
,
Config,